Belkin N300 User Manual page 66

WIRELESS
Wireless Filter
Enable Wireless
Access Control
Description
MAC address
Add
Reset
MAC Address Filtering Table
Only clients listed in this table will be allowed access to the wireless network.
Delete Selected
Delete All
Reset
Check the box to Enable Wireless Access Control.
When Enabled, only wireless clients on the Filtering Table will be allowed.
Enter a name or description for this entry.
Enter the MAC address of the wireless client that you wish to allow a connection.
Click this button to add the entry.
Click this button if you have made a mistake and want to reset the MAC address and Description fields.
Delete the selected entries.
Delete all entries.
Un-check all selected entries.
63