Dial Mode; First Ring; Telephone Operation; Make A Call - RCA 2101-2 User Manual

Dial mode

Note: This feature only applies to models that support both tone and pulse
dial.
Dial mode is the telephone signal used in your country. The phone supports
tone (DTMF) and pulse (rotary) dial. Consult your service provider for more
detailed information.
Set the dial mode
1. Press MENU.
2. Select [ADVANCED SET] > [DIAL MODE], then press [OK] to confirm.
3. Select a dial mode, then press [OK] to confirm.
»» The setting is saved.
Note: If your phone is in pulse dial mode, press [*] button during a call
for temporary tone mode. Digits entered for this call are then sent
out as tone signals.

First ring

If you have subscribed to the caller ID service with your service provider,
your phone can suppress the first ring before the caller ID displays on the
screen. After the phone is reset, it can detect automatically if the caller ID
service is subscribed and start to suppress the first ring. You can change
this setting to suit your preference. This feature only applies to models with
first ring support.
Turn the first ring on/off
1. Press MENU.
2. Select [ADVANCED SET] > [FIRST RING], then press [OK] to confirm.
3. Select [ON]/[OFF], press [OK] to confirm.
»» The setting is saved.
Note: To reset the first ring status, go to the reset menu.

Telephone Operation

Make a call

You can make a call in these ways:
• Quick call
• Dial before you call
• Redial the most recent number
• Call from the redial list.
• Call from the phonebook list
• Call from the call log
18