Display Icons; Installing The Phone - RCA 2101-2 User Manual

Display Icons

In standby mode, the icons shown on the main screen tell you what
features are available on your handset.
Icon Descriptions
When the handset is off the base station/charger, the bars indicate
the battery level (full, medium and low).
When the handset is on the base station/charger, the bars keep
scrolling until charging completes.
The empty battery icon flashes and you hear an alert tone.
The battery is low and needs recharging.
Indicates that the handset is registered and within range of the base
station.
Icon blinks when the handset is out of range or is searching for a base.
The ringer is off.
There is an unheard voice message.

Installing the Phone

Installing the Handset Battery
NOTE: You must connect the handset battery before use.
N i c k e l m e t a l H y d r i d e b a t t e r y ( N i - M H ) b a t t e r y ( B r a n d
name: SANIK , Model name: 2SN-AAA55H-S-J1, Capacity:
2.4V/550mAh; Brand name: BYD, Model name: H-AAA550BX2,
Capacity: 2.4V/550mAh,CORUN,Model name: NI-MH AAA550,
Capacity:2.4V/550mAh.), that is compatible with this unit .
1. Locate the battery and the battery compartment door which are
packaged together inside a plastic bag and are separate from the handset .
2. Locate the battery compartment on the back of the handset.
NOTE: To ensure proper battery installation, the connector is keyed
and can be inserted only one way.
12