Hotpoint RVM1625 Owner's Manual page 31

Light Bulb Replacement
To replace the bulb(s),
first disconnect the power
at the main fuse or drcuit
breaker panel or pull
the plug.
Remove the screw at the
front of the light cover
and lower the cover.
Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal, remove
the bulb by gently mining.
Replace the screw.
Connect electrical power
to the oven.
To replace the oven light,
first disconnect the power
at the main fuse or circuit
breaker panel or pull
the plug.
Remove the top grille by
taking out the 2 screws
that hold it in place.
Next, remove the screw
located above the door
near the center of the
oven that secures the
light housing.
Replace the screw.
Connect electrical
power to the oven.