Specifications - American Audio VLP1500 User Instructions

VLP SerIeS SPeCS
Power supply:
MODEL:
Output Power: 150W RMS per Channel @ 4 Ohms, 300W RMS per Channel @ 4 Ohms, 7500W RMS per Channel @ 4 Ohms,
1kHz, 0.1% THD
100W RMS per Channel @ 8 Ohms, 200W RMS per Channel @ 4 Ohms, 500W RMS per Channel @ 4 Ohms,
1kHz, o.1% THD
(Bridge Mode, Mono)
300W RMS @ 8 Ohms,
1kHz, 1% THD
Total Harmonic Less Then 0.1% (20Hz - 20kHZ @
Distortion (THD): 8 Ohms
Frequency (+/-01db, @ rated output power,
Response: 8 Ohms): 20Hz - 20KHz
Slew rate: 15v per usec
Damping Factor @ 260
8 ohm:
Impedance: 20K Ohms Balanced
10K Ohms Unbalanced
Dimensions 13.25" x 19" x 1.75"
(LxWxH): 336 x 482 x 44mm
Weight: 24lbs/11Kgs
AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
VLP 300
American Audio® - www.americanaudio.com - vLp Series™ power Amplifier user manual page 17
VLP 600
1kHz, 0.1% THD
1kHz, 0.1% THD
(Bridge Mode, Mono)
600W RMS @ 8 Ohms,
1kHz, 1% THD
Less Then 0.1% (20Hz - 20kHZ @
8 Ohms
(+/-01db, @ rated output power,
8 Ohms): 20Hz - 20KHz
15v per usec
300
20K Ohms Balanced
10K Ohms Unbalanced
14" x 19" x 3.5"
360 x 482 x 88mm
33lbs/15Kgs
VLP 1500
1kHz, 0.1% THD
1kHz, 0.1% THD
(Bridge Mode, Mono)
1500W RMS @ 8 Ohms,
1kHz, 1% THD
Less Then 0.1% (20Hz - 20kHZ @
8 Ohms
(+/-01db, @ rated output power,
8 Ohms): 20Hz - 20KHz
15v per use
300
20K Ohms Balanced
10K Ohms Unbalanced
14" x 19" x 3.5"
360 x 482 x 88mm
42lbs/19Kgs