Chapter 5. Configuration
5.14 ETC
5.14.1 Firmware Upgrade
Users can upgrade the software by doing a firmware download. You can download the firmware with
a USB Memory stick.
① Select 'MENU' and go to [SYSTEM SETUP]-[SYSTEM]-[TEST MODE].
② The DVR will reboot and the system will show the DVR DIAGNOSTICS MENU as below.
③ Please create a folder in the USB memory stick and name it 'UPGRADE' . Copy the upgrade file into
the folder and connect the USB memory stick to the DVR.
The folder's name must be 'upgrade' . If the folder's name is not 'upgrade' , the system cannot down-
load the correct firmware from the USB memory stick.
④ Select USB UPGRADE on the screen and the firmware upgrade automatically proceeds.
⑦ When the upgrade is done, the DVR will be rebooted. Select BOOT APPLICATION in the test mode.
⑧ The DVR will be rebooted again and go back to live monitoring screen mode. Now the firmware
upgrade is completed.
• The function to upgrade firmware over a network is not provided, because upgrading
the firmware over a network could cause a fatal error in the system if th network got
Notes
disconnected.
Digital Video Recorder
68
User's Manual