4 Use your power
amplifier
Select crossover frequency
mode
You can select crossover frequency mode as
below:
HPF (high-pass-
Select this mode when
filter) mode
mid-range speakers and
tweeters are connected
for high frequency output.
LPF (Low-pass-
Select this mode when
filter) mode
woofer and subwoofer
is connected for low
frequency output.
OFF (flat) mode Select this mode when
tri-mode speaker
connection is used.
1
Slide HPF/OFF/LPF to the selected positon.
Adjust frequency
You can adjust frequency of HPF or LPF from
30HZ to 400Hz.
Note
•
HPF/OFF/LPF switch is set at OFF
When the
position, the frequency adjustment does not
work.
EN
10
1
Rotate FREQ to select frequency.
Adjust input level
You can adjust the input voltage from 0.3V to
6V.
1
Rotate INPUT LEVEL to adjust input
voltage.
Adjust bass boost
You can punch extra bass for 0 to 12dB.
1
Rotate BASS BOOST to punch for extra
bass.