Connect Power - Philips CMP200 User Manual

Connect power

1
Make the power connection as illustrated below:
• Connect the ground wire from the car to the
• Connect the remote wire from the car audio to the
√ With this connection, you can turn on/off the amplifier with the car audio.
• Connect the power wire from the car battery to the
to a metal point of the car
Remote output
Car audio unit
Tip
•
If your car audio does not have remote output, connect the remote input terminal (REM) to the accessory
power supply.
GND socket.
REM socket.
+12V socket.
L R
less than 450 mm (18 in)
Fuse (60 A)
+12 V car battery
EN
9