Download  Print this page

Important; Safety; Notice - Philips CMP200 User Manual

Hide thumbs


1 Important


Read and understand all instructions
before you use the apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
This unit is designed for negative ground
(earth) 12 V DC operation only.
Use only the supplied mounting hardware
for a safe and secure installation.
Do not connect any active speakers (with
built-in amplifier) to the speaker terminals
of the unit. Doing so may damage the
active speakers.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Never expose the apparatus to direct
sunlight, naked flames or heat.
Clean the apparatus with soft, damp
cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the apparatus.


Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user's
authority to operate the equipment.
2009 © Koninklijke Philips Electronics N.V.
All rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.


Table of Contents

   Also See for Philips CMP200

   Related Manuals for Philips CMP200

   Related Content for Philips CMP200

Comments to this Manuals

Symbols: 0
Latest comments: