Honeywell VISTA-128FBP User Manual page 13

ALPHA DISPLAY WINDOW: A 2-line,
32-character Liquid Crystal Display (LCD).
Displays protection point identification and
system status, messages,
instructions.
1 OFF : Disarms the burglary portion of
the system, silences alarms and audible
trouble indicators, and clears visual alarm
trouble after the
corrected.
2 AWAY : Completely
perimeter and interior burglary protection
by sensing an intruder's
through protected interior areas as well as
guarding protected doors, windows, etc.
Late arrivals can enter through an entry
delay zone without causing an alarm if the
system is disarmed before the entry delay
time expires.
3 STAY : Arms the perimeter burglary
protection, guarding
windows and other perimeter protection
points, and sounds an alarm if one is
opened. Allows automatic bypassing of
certain areas, which allows movement
within your house without causing an
alarm. Late arrivals can enter through an
entry delay zone without causing an alarm
if the system is disarmed before the entry
delay time expires.
PERIMETER ONLY for a full explanation
of the STAY key.
Functions of the Keypad (cont'd)
and user
problem has been
arms both
movements
protected doors,
See ARMING
4 MAX: Arms in manner similar to
AWAY mode, but eliminates the entry
delay period, thus providing maximum
protection. An
immediately upon opening any protection
point, including entry delay zones.
5 TEST : Tests the system and alarm
sounder if disarmed.
6 BYPASS : Removes
protection zones from being monitored by
the system. Displays previously bypassed
protection zones.
7 INSTANT : Arms in manner similar to
STAY mode, but turns off the entry delay
period, offering greater security while
inside and not expecting any late arrivals.
An alarm will occur immediately upon
opening any perimeter protection point,
including entry delay zones.
8 CODE : Allows the entry of additional
user codes that can be given to other users
of the system.
9 CHIME : Turns on and off the
CHIME mode. When on, any entry through
a protected delay or perimeter zone while
the system is disarmed will cause a tone to
sound at the Keypad(s).
alarm will occur
individual
–13 –