Honeywell T7350 Product Data page 32

T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
T7350D
Fig. 32. Cooling Config(uration) screen.
12. Make changes and tap "Next" to proceed to the Heating
Config(uration) screen.
13. The Heating Config(uration) screen facilitates changes
to:
a. Number of Stages.
b. Heating Response.
c. OAT Lockout and DAT High Limit Setpoints (for
some models).
T7350D
Fig. 33. Heating Config(uration) screen.
14. Make changes and tap "Next" to proceed to the Outputs
screen.
15. The Outputs screen facilitates changes to output
type(s).
NOTE: When configured with an extra stage of heat or
cool (using the auxiliary stage) the Outputs
screen shows nothing but this indication.
63-2605—5
T7350M
16. Make changes and tap "Next" to proceed to the Fan
17. The Fan screen facilitates changes to:
18. Make changes and tap "Next" to proceed to the Weekly
T7350M
19. The Weekly Schedule screen facilitates changes to the
32
Fig. 34. Outputs screen.
screen.
a. Fan Switch (On or Auto).
b. Fan Operation (Conventional or Electric Heat).
c. Heat and cool extended operation.
Fig. 35. Fan screen.
Schedule screen.
NOTE: The only schedule days/times displayed are
those in the program. It is possible to have as
many as 4 event times per day for each day
(including holiday) programmed into each set.
program schedule:
a. Tap Modify. (See Fig. 37.)
b. Select a day to modify.
c. Make changes to:
(1) Mode (see Fig. 38).
NOTE: To remove a given event, change Mode
to "None".
(2) Time (see Fig. 39).
d. Repeat step c for all events until changes are
complete for the given day.
NOTE: To copy a day schedule, check the appropriate
boxes, and click CopyDayTo. (See Fig. 40.)
e. Tap OK.
f. Type in a name for the new schedule.
g. Tap SaveAs.