Installer Setup; Advanced Settings - Honeywell TB7100A1000 MultiPRO Product Data

MONTH YEAR
Tue
DeSelect Day FanUseEdit
System & Fan Schedule
GO BACK BUTTON
GOES BACK TO LAST SETTING
Fig. 29. Setting calendar when thermostat is first powered.
DONE BUTTON
ADVANCES TO HOME SCREEN
Fig. 30. Setting time when thermostat is first powered.

INSTALLER SETUP

Advanced Settings

The thermostat has advanced settings to match the HVAC
system. These settings can be adjusted to match specific
needs.
There are two different groups of settings:
— A complete set designed for the installation use.
— A simple set to limit accessibility for typical users.
Installer Settings (Complete Set)
Access to the installer settings is obtained as follows:
1. From the main screen, press SYSTEM.
2. Press and hold the two keys on either side of the center
key for approximately five seconds. (See Fig. 31.)
TB7100A1000 MULTIPRO™ MULTISPEED AND MULTIPURPOSE THERMOSTAT
UP AND DOWN
DAY
BUTTONS
CHANGES
MONTH,
DAY AND
YEAR
View
Clock & More
DONE
BUTTON
ADVANCES
TO TIME
SETTING
SCREEN
NEXT BUTTON
ADVANCE TO NEXT SETTING
M22302A
UP AND DOWN BUTTONS
CHANGES TIME
View
Clock & More
M22303
3. The Setup Number displays to the center of the screen.
It is a four-digit code beginning with zero. The current
setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 31. Entering Installer Setup.
User Settings (Simple Set)
Access to the user settings is obtained as follows:
1. From the main screen, press SYSTEM.
2. Press and hold the center key approximately five sec-
onds.
3. The Setup Number displays to the center of the screen.
It is a four-digit code beginning with zero. The current
setting is displayed to the right.
NOTE: To cycle through the Setup Numbers, press the up or
down arrow.
Fig. 32. Entering User Setup.
11
Tue
Set To
System Fan Auto
Auto
Heat Off Cool
System & Fan Schedule Clock & More
System Fan Auto
Auto
Em Heat Off Cool
FanUseEdit
System & Fan
CancelDone
M22304
M22305
63-2675—03