Make Changes To Installer Setup; Installer Options - Honeywell VISIONPRO 8000 Installation Manual

VISIONPRO® 8000 SMART THERMOSTAT
Thermostat Password (Date Code)
Fig. 18. Locate password.
The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 1.
Fig. 19.
33-00096—05
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
1
M37810A
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Reset To Defaults
Device Info
Table 1. Installer Options.
Menu Item
Installer Setup Select INSTALLER SETUP to set system
settings one by one.
Installer Test Select INSTALLER TEST to quickly
determine if the heat, cool, fan and
thermostat are operating properly.
Minimum off timers are ignored during
the test.
Reset To Select RESET TO DEFAULTS to place all
Defaults thermostat settings back to the factory
settings.
Device Info For internal use only.

Make Changes to Installer Setup

1. Touch Menu.
2. Select Installer Options.

Installer Options

3. Enter password (date code) and touch Done. See
"Finding Your Password (Date Code) to Access
Installer Options" beginning on page 9 for more
information.
Enter password
4. Select Installer Setup.
Installer Setup
Installer Test
5. Follow prompts on the screen to select the desired
setup options. See Table 2 for Installer Setup options.
10
Description
MCR33976
Fig. 20.
0 0 0 0
MCR33977
Fig. 21.
MCR34015
Fig. 22.