Scan - Clarion SUBARU PF-3380I-A User Manual

５-３-７．

SCAN

Function RADIO Station SCAN UP
Operation
Touch SCAN key
of button
If you touch the SCAN key in RADIO mode, it will start to scan radio station which is possible to receive.
It will start to scan radio stations, which is possible to receive, from the next frequency.
It will be mute while scaning, if there is no station which is possible to receive.
Mute mode will be off and radio sound comes out, when radio station, which is possible to receive, is found.
When radio station, which is possible to receive, is found, it will receive the frequency for 5 seconds, then goes on to
scan the next station.
It will scan around for once, and stop when it goes to the frequency that it starts.
It will not scan the beginning station (the ending station).
SCAN mode will be released by following conditions.
When you go to other sourcemode.
Detail When you switch to other band.
when you turn ACC / POWER OFF.
When you turn the TUNE key.
When you touch the >> or << key.
When you touch the 1 ～ 6 key.
When you touch the SCAN key.
When you touch the PTY / CAT key.
User Manual.doc
（The last frequency is the frequency before scan.）
（The last frequency is the frequency before scan.）
（The last frequency is the frequency before scan.）
（Stop at the frequency when key is ON）
（Stop at the frequency when key is ON）
（Call the cahannel you touch when key is ON）
（Scan starts from the frequency when key is ON）
（Start PTY selection mode from the frequency when key is ON.）
- 26 / 156 -