5-4.
Operation of Satellite Radio(XM)
5-4-1.
Call /switch to XM mode
Function
Call /Switch to XM mode
Operation
Touch SAT key
of button
If you touch the SAT key when it is in other source mode, it will start to receive the channel signal of last band and
last memory of XM.
It is effective when POWER OFF.
The XM band will switch to next like the following when you touch SAT key in XM mode.。
Detail
※
When receiving channel signal, it will go to the last mode after displaying the channel No. for 3 seconds.
Initial setting is BAND1 (XM1) and CHANNEL001 (PREVIEW CHANNEL).
XM1
→
XM2
→
The display will be "SAT" but not "XM".
User Manual.doc
XM3
→
XM1
- 31 / 156 -