Determining _.Lll Plate L.oration - GE JVM1490 Installation Instructions Manual

Installation Instructions
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Plate position - beneath framed recessed
cabinet bottom
Mounting Plate Tabs
_gthe Cabinet Bottom
At least 30", up to 3B"
Mounting Plate Tabs
Touching the Back
Frame
II
30"to Cooktop
Plate position - beneath recessed bottom
cabinet with front overhang
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
g Depth
LL
Ill
30" to Cool<top
Your cabinets may have decorative trim that interferes
with the oven installation. Remove the decorative trim
to install the oven i)roperly and to make it level.
THE OVEN MUST BE LEVEL
ILlse a level to make sure the cabinet bottom is level.
If the cabinets have a fl'ont overhang only, with no
back or side fl'ame, install the mounting plate down
the same distance as the fl'ont overhang depth. This
will kee I) the oven level.
[]Measure the inside depth of the fl'ont overhang.
Draw a horizontal line on the back wall
equal
distance below the cabinet bottom as the inside
depth of the fi'ont overhang.
[]For this t):pe of installation with fi'ont overhang only,
align the mounting tabs with this horizontal line, not
touching the cabinet bottom as described in Step D.
9