An Accessorg Storage Drawer) - GE Advantium PSB1200 Installation Instructions Manual

Installation Preparation
PreparationWITHOUTan AccessorgStorageDrawer
PREPARE THE OPENING {cont.)
Installation over another GE/Monogram
Under-the-Counter (UTC) oven:
30" ........... _-- 23-1/2"
17-1/2"
Construct Solid
Bottom Min.
3/8" Plywood
_Supported by
2x4or2x2
Runners all
Four Sides
Min.
Recommended)
17-1/2"
• If Uou are mounting an Under-the-Counter
GE/IVlonogram oven over another, use the
dimensions shown. The middle rail separating
the two openings may need to be larger than
the 2" minimum shown.
PREPARE THE OPENING {cont.)
Installation under a GE/Monogram
Microwave Oven and over a Warming
Drawer:
30" ..................... _,,._,i_3-1/2"
Per Oven
Requirement
17-1/2"
Per Warming
Drawer Requirement
ConstructSolid
Bottom Min.
3/8" Plywood
ySupported by
2x4or2x2
Runnersall
FourSides
Min.
4.5" Recommended)
Min.
(3" Recommended)
NOTE: Additional clearances between the cutouts
may be required. Check to be sure the oven
supports above the Warming Drawer location
do not obstruct the required interior depth
and height. See Warming Drawer installation
instructions for details.
_4, CAUTION: For
personal safety,
the
mounting surface must be capable of supporting
the cabinet load, in addition to the added weight
of this approximate 80-pound oven, plus
additional oven loads of up to 50 pounds
or a total weight of 1:30 pounds.