Mp3/Wma/Aac; Playing Mp3 Data (Play Mode); External Device; Turning Mute Mode On/Off (Int Mute) - Alpine CDE-104BTi Owner's Manual

MP3/WMA/AAC

Playing MP3 Data (PLAY MODE)

CD-DA (Initial setting) / CDDA/MP3
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
CD-DA: Only the CD data in Session 1 can be played back.
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.

External Device

Turning Mute Mode On/Off (INT MUTE)

MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.

Connecting to an External Amplifier (POWER IC)

POW ON (Initial setting) / POW OFF
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
POW OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and cannot drive speakers.
CDE-102Ri/CDE-103BT/CDE-104BTi:
CDE-101R/CDE-101RM:
20
-EN
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Front
left
Amplifier
Front
right
POW ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

Setting the AUX+ SETUP Mode

AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCE-237B) for build up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If
SOURCE/
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ is set to ON.
/ /
Press ENT when AUX+ is set to ON, and select AUX+ NAME
by turning the Rotary encoder, then press
the Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode (CDE-102Ri/CDE-103BT/
CDE-104BTi only)
1
AUXILIARY * (Initial setting) / TV / DVD / PORTABLE*
You can change the AUX NAME display in the SETUP mode.
1
* After the setting is completed, AUX is displayed on the unit.
2
* After the setting is completed, PMD is displayed on the unit.
Speakers
Front
right
Rear
right
Rear
left
Front
left
is pressed and AUX+ is selected, the
/ /
ENT. After that, turn
2
/ GAME