Wall Mount Installation - AEG Voxtel C115 User Manual

6
7

WALL MOUNT INSTALLATION

To place the Voxtel C110 on a wall, connect the wall mount bracket to the bottom of the phone in the
slots near the front of the base as shown below
Insert the rigid clips of the bracket into the slots on the bottom of the phone (nearer the front of the
base). Press down firmly until the flexible clips click into place in the slots nearer the centre of the base.
To remove the bracket, (1) pinch the flexible clips, (2) back the bracket, and then (3) slide up and
forward as shown below.
Mark two points on the wall that are 80 mm apart to lay the fixing centres as shown below.
parking hook
lay the centres as
parking recess
rotate
BE CAREFUL to check that there are no pipes or electrical wires hidden in the wall.
Fix two screws (7 mm head screws required, not supplied) at the marked locations, leaving
approximately 7 mm between the wall and the screw head.
Hang the telephone on the screws using the wall mount slots. You may need adjust the screws so that
the telephone is securely fixed and does not wobble.
Place the handset on the cradle with the parking hook on the cradle arranged to fit in the parking
recess under the earpiece on the handset.