Wall Mount Installation - AEG Voxtel C50 Quick Start Manual

4
5 INSTALLATION
1. Locating the base unit (See P2)
The base unit should be placed on a level surface, in a position where:
• the telephone line cable will reach your telephone line socket or extension socket.
• it is not close to a sink, bath or shower, or anywhere else where it might get wet.
• it is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs,
fluorescent lights, etc.
2. Plug the coiled handset cord into the handset
3. Place the handset on the base unit.
4. Plug the telephone line cord into the phone line socket of the base unit
into your telephone line socket.
5. Lift the handset and check for dial tone in the earpiece.=
6

WALL MOUNT INSTALLATION

Please read the instructions on this template carefully before you start to wall mount your telephone.
I f you prefer, you can stand your telephone on a level surface.
Be careful - check that there are no electrical wires hidden in the wall.
1. Use this template for wallmounting, marking the wall at the fixing centers. The marks should be
102mm apart.
2. Using screws(not supply with the unit) screw in at the two marked locations, leaving appox.
7mm("1/4) between the wall and underside of screw head.
3. Tuck the telephone line cord into the grooves on the cradle. Make sure that the parking hook lever
is pushed to the top position.
4. Hang the cradle unit on the screws using the wallmounting slots on the underside of the unit.
You may need to remove the telephone from the wall and tighten the screws so that the cradle is
securely fixed and does not wobble.
5. Rest the handset on the cradle using the parking hook on the cradle and the parking recess under
the earpiece on the handset.
4
.
5
and the other end