Installation Of The Appliance; Emergency Call With Locked Keypad - AEG Milano 40 User Manual

Corded telephone with caller id
Table of Contents

Advertisement

Installation of the appliance

1.
Plug in the small connector of the power supply (coming from the adapter)
at the backside of the base in power inlet (F). Plug in the adapter in the wall
outlet (230V~).
2.
Use the telephone line cord to realize the connection between the tele-
phone inlet and the connection (E) at the back of the base.
3.
Connect the handset cable to the inlet (D) of the base (A) and with plug (C)
to the handset (B).
This manual is meant for your information. Its contents are no part of
the contract. All values quoted are standard values.
The described equipment and the options can be different, depending
on the requirements of your country. We reserve our right to technical
modifications.

Emergency call with locked keypad

When the keypad is locked, it is not possible to make calls without prior dis-
abling the keypad locking. Making an emergency call (110 or 112), on the other
hand, is an exception to this rule. Emergency numbers with 4 figures at the
most will still be accessible.
When you programmed a zone prefix number of 3 digits and / or an operator
prefix number of maximum 6 digits, these numerals are put in front of the tele-
phone number for emergencies and dialed before the telephone number.
Attention:
If you use more than 4 digits, when dialing an emergency telephone number,
the announcement "Key Lock-On" appears on the display, and after the fifth
digit, further input will be ignored.
8
AEG Milano 40 V.2_en

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents