3. 3. 3. 3. Panel and Names
Panel and Names
Panel and Names
Panel and Names
STATUS LED
OP-St
AD-4402 and option status
Net-St
Network status
Station Address Switch (station No. )
x16
Hexadecimal number, upper figures
x1
Hexadecimal number, lower figures
3.1.1.
3.1.1.
3.1.1.
3.1.1.
STATION NO. and Baud
STATION NO. and Baud
STATION NO. and Baud
STATION NO. and Baud Rate
Station Address
Set a station address (station No.) of this slave device
using two switches.
Switches
Range
Example: For address 44, Turn the dial to 2 (x16), C (x1).
Baud Rate
Baud rate is automatically detected. It is not necessary to set the rate.
9.6
19.2
93.75
187.5
500
1.5
3
6
12
3.1.2.
3.1.2.
3.1.2.
3.1.2.
Status LED
Status LED
Status LED
Status LED
These LEDs indicate the status of the interface.
Green ON
Flashing Green
Red ON
Flashing Red
0
1
x1, x16 (16
, 16
)
0 to 125.
kbps
kbps
kbps
kbps
kbps
Mbps
Mbps
Mbps
Mbps
OP-St (AD-4402 and option status)
Device operational
-
Unrecoverable fault
Recoverable fault
Rate
Rate
Rate
On-line (Normal )
Off-line
-
Communication error
Page 4
Connector
D-sub 9pin
Net-St (Network status)
AD-4402 OP-22