Sharp SX813 User Manual page 59

Note
• If you select "For Message" for the recording time,
the file size is limited depending on the service
provider. Therefore, the quality is also limited for the
setting.
• "Save and Send" is not displayed after recording in
the Extended Video mode.
• When you select "Extended Video", you can select
the video format from "QCIF or SubQCIF" or
"QVGA(MPEG4)".
Switching to the Photo Camera Mode
You can switch to the digital camera mode. You can
also switch to the photo camera mode by pressing c.
→
"Camera" [Options]
Selecting Video Quality
→
"Camera" [Options]
"Video Quality"
1.
Select the desired video quality.
Video quality indicators
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger file size is
needed.
→
"Go to Photo Camera"
→ →
"Video Settings"
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone
needs to be activated.
→
"Camera" [Options]
"Microphone"
1.
Select "On" or "Off".
Note
• The microphone is already turned on in the default
setting. Select "Off" to record a video clip without
the sound.
Tip
• The file size of a video clip can be reduced if the
sound is not recorded.
→ →
"Video Settings"
Camera 59