Sharp SX813 User Manual page 41

Press J for the vowel of the first letter, then
2.
highlight "li".
Characters with the same reading are displayed in
the Candidate field.
3.
Select the desired character.
4.
Long press corresponding numeric key to enter the
desired character (in this case, H).
Tip
• When the cursor is placed after the first character,
the Candidate field displays characters most likely to
follow.
• If you want to use tone options,
long press P instead of step 3
to display the desired character.
The tone symbols are displayed
in the Candidate field.
Press the corresponding
numeric key (H).
Entering Characters 41