Sharp SX813 User Manual page 130

2.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "To Change the
Handset Code" on page 124.
3.
Enter the device passcode for unpaired devices.
4.
Select the desired data to send.
Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other phones from recognising your phone, turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
→
"Connectivity" "Bluetooth"
→
Settings" "Device Name"
1.
Enter the new device name.
130 Connectivity
→
"Bluetooth
To Turn Off Automatically
→
"Connectivity" "Bluetooth"
→
Settings" "Bluetooth Timeout"
1.
Select the desired time.
Your phone turns the function off automatically in
the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
→
"Connectivity" "Bluetooth"
→
Settings" "Handsfree Setting"
1.
Select "Private mode" or "Handsfree mode".
"Private mode":
"Handsfree mode": For talking with the handsfree
→
"Bluetooth
→
"Bluetooth
For talking with the handset
kit