Sharp SX813 User Manual page 121

Fixed Dialling No.
When the Fixed Dialling No. is enabled, you can only
call pre-registered numbers.
To Enable Fixed Dialling No.
→
"Settings" "Call Settings"
→
"Fixed Dialling No."
1.
Select "On" to enable this function.
To Add a New Name
→
"Settings" "Call Settings"
→
"Fixed Dialling No."
1.
Highlight the blank entry, press [Options], then
select "Add New Dial".
2.
Enter your PIN2 code.
3.
Add a name and a phone number.
For details on adding a name and a phone number,
see "Add New Contact" on page 45.
4.
Press [Save].
Rejecting an Incoming Call
You can register phone numbers you do not wish to
answer.
→
"Restrict Calls"
"Switch On/Off"
→
"Restrict Calls"
"Edit Dial List"
To Reject the Registered Number
→
"Settings"
"Rejected Numbers"
1.
Select "On" or "Off".
→
To Register the Rejected Number
→
"Settings"
"Rejected Numbers"
1.
Select a blank field.
2.
→ Enter the desired number.
Changing the Network Password
→
"Settings"
"Change N/W Password"
1.
Enter the old network password.
2.
Enter a new network password.
3.
Enter the new network password again.
If you enter the incorrect password, you are asked to
enter the password again.
4.
Press .
→
"Call Settings" "Restrict Calls"
→
"Switch On/Off"
→
"Call Settings" "Restrict Calls"
→
"Set Rejecting Number"
→
"Call Settings" "Restrict Calls"
→
→
→
Settings 121