Sensor Care And Cleaning - 3M Touch Screen Controller EX 111 Reference Manual

6
Explanation of Signal Word Consequences
WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury and/or property damage.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may
result in property damage.
WARNING
To reduce the risk of fire and/or explosion which could result in serious injury or
death:
Do not install or use this product in a hazardous location.
To reduce the risk of fire and/or explosion which could result in serious injury or
property damage:
Do not use this product in any outdoor environment unless NEMA standards (or
similar standards such as IP rating) are followed.
To avoid the risk of electric shock which could result in serious injury or death:

Do not use a damaged power supply.

Do not use a power cord that is frayed or otherwise damaged.
CAUTION
To reduce the risks associated with improper disposal, which if not avoided may
result in minor or moderate injury from ground water contamination:
Dispose of components in accordance with federal, state and local regulations.
To reduce the risk of possible environmental contamination which may result in
minor or moderate injury:
Dispose of the display in accordance with federal, state and local regulations.
To reduce the risk of the potentially hazardous situations associated with the use
of isopropyl alcohol which may result in minor or moderate injury or property
damage:
Follow all instructions and recommendations in the manufacturer's Material Safety
Data Sheet and product label.

Sensor Care and Cleaning

The sensor requires very little maintenance. 3M Touch Systems recommends that you
periodically clean the glass surface.
Typically, an isopropyl alcohol and water solution ratio of 50:50 is the best cleaning
agent for your touch screen. You can also use straight isopropyl alcohol. Be sure to
follow solvent manufacturer's precautions and directions for use when using any solvents.
 It is important to avoid using any caustic chemicals on the sensor.

Always dampen the cloth and then clean the screen. Be sure to spray the cleaning
liquid onto the cloth, not the screen, so that drips do not seep inside the display or
stain the bezel.
3M Touch Systems, Inc. Proprietary Information -- 29489v05
3M™ MicroTouch™ Controller EX USB Reference Guide