Belkin F5D7632EA4A User Manual page 22

Manually Configuring your Router
(1)
(2)
(3)
1. IP Assigned by ISP — Leave "Yes" if your ISP automatically assigns an IP
address. If your ISP assigned a fixed IP address, select "No" and enter assigned
values.
2. VPI/VCI — Enter your VPI and VCI parameter here. These identifiers are
assigned by your ISP.
3. Encapsulation — Select LLC or VC MUX your ISP uses.
Setting your ISP Connection Type to Static IP (IPoA)
This connection type is also called "Classical IP over ATM" or "CLIP", which your
ISP provides a fixed IP for your Router to connect to the Internet.
(1)
(2)
(3)
(4)
(5)
1. IP Address — Enter an IP address assigned by your ISP for the Router WAN
interface.
2. Subnet Mask — Enter a subnet mask assigned by your ISP.
3. Default Gateway — Enter a default gateway IP address. If the Router cannot find
the destination address within its local network, it will forward the packets to the
default gateway assigned by your ISP.
4. VPI/VCI — Enter your VPI and VCI parameter here. These identifiers are
assigned by your ISP.
5. Encapsulation — Select LLC or VC MUX your ISP uses.
20 20