Belkin F5D7230-4 User Manual
  1. Manuals
  2. Brands
  3. Belkin Manuals
  4. Wireless Router
  5. F5D7230-4
  6. User manual
Belkin F5D7230-4 User Manual

Belkin F5D7230-4 User Manual

Wireless g router
Hide thumbs Also See for F5D7230-4:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Wireless G
Router

User Manual

F5D7230-4

Advertisement

Table of Contents
loading

Related Manuals for Belkin F5D7230-4

Summary of Contents for Belkin F5D7230-4

  • Page 1: User Manual

    Wireless G Router User Manual F5D7230-4...

  • Page 3: Table Of Contents

    Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits of a Home Network .

  • Page 5: Introduction

    Introduction Thank you for purchasing the Belkin Wireless G Router (the Router) . The following two short sections discuss the benefits of home networking and outline best practices for maximizing your wireless home network range and performance . Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your Router for Optimal Performance”...

  • Page 6: Placement Of Your Router For Optimal Performance

    . To achieve the best wireless network coverage for your “wireless clients” (i .e ., computers enabled by Belkin Wireless Notebook Network Cards, Wireless Desktop Network Cards, and Wireless USB Adapters): •...
  • Page 7 Introduction Avoid Obstacles and Interference Avoid placing your Router near devices that may emit radio “noise,” such as microwave ovens . Dense objects that can inhibit wireless communication include: • Refrigerators • Washers and/or dryers • Metal cabinets • Large aquariums • Metallic-based, UV-tinted windows If your wireless signal seems weak in some spots, make sure that objects such as these are not blocking the signal’s path (between your computers and Router) .
  • Page 8 . • For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your Wireless Network Card . See your Network Card’s user guide for more information .
  • Page 9 Introduction For more information regarding our networking products, visit our website at www.belkin.com/networking or call Belkin Technical Support at: US: 877-736-5771 800-223-5546 ext. 2263 310-898-1100 ext. 2263 UK: 0845 607 77 87 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 65 64857620 Europe: www.belkin.com/support...

  • Page 10: Product Overview

    Product Features In minutes you will be able to share your Internet connection and network your computers . The following is a list of features that make your new Belkin Wireless G Router an ideal solution for your home or small office network . Works with Both PCs and Mac Computers ®...
  • Page 11 Product Overview NAT IP Address Sharing Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding IP addresses to your Internet service account . SPI Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including IP Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding, Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding.
  • Page 12 Product Overview Support for VPN Pass-Through If you connect to your office network from home using a VPN connection, your Router will allow your VPN-equipped computer to pass through the Router and to your office network . Built-In Dynamic Host Configuration Protocol (DHCP) Built-In Dynamic Host Configuration Protocol (DHCP) on-board makes for the easiest possible connection of a network . The DHCP server will assign IP addresses to each computer automatically so there is no need for a complicated networking setup .

  • Page 13: Knowing Your Router

    Knowing your Router Package Contents • Belkin Wireless G Router • Quick Installation Guide • Belkin Setup Assistant Software CD with User Manual • Belkin RJ45 Ethernet Networking Cable • Power Supply System Requirements • Broadband Internet connection such as a cable or DSL modem with RJ45 (Ethernet) connection • At least one computer with an installed network interface adapter • TCP/IP networking protocol installed on each computer • RJ45 Ethernet networking cable • Internet browser Setup Assistant Software System Requirements • A PC running Windows 2000, XP, or Vista, or a Mac computer running Mac OS X • Minimum 64MB RAM • Internet browser...
  • Page 14 Knowing your Router The Router has been designed to be placed on a desktop . All of the cables exit from the rear of the Router for better organization and utility . The LED indicators are easily visible on the front of the Router to provide you with information about network activity and status .
  • Page 15 Knowing your Router Wireless Network LED Wireless Network is OFF Solid Green Wireless Clients Connected Blinking Green Indicates Wireless Activity Wired Computer Status LEDs These LEDs are labeled 1–4 and correspond to the numbered ports on the rear of the Router . When a computer is properly connected to one of the wired computer ports on the rear of the Router, the LED will light .
  • Page 16 Knowing your Router (10) Reset button is located on the bottom of the unit. Power Jack Connect the included 9V DC power supply to this jack . Connections to Computers (Wired Computer Ports) – Gray Connect your wired (non-wireless) computers to these ports . These ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable .
  • Page 17 Knowing your Router 10. Reset Button The “Reset” button is used in rare cases when the Router may function improperly . Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings . You can also restore the factory default settings by using the “Reset”...

  • Page 18: Connecting And Configuring Your Router

    SUCH AS NOTEBOOK CARDS AND DESKTOP CARDS . Setup Assistant Belkin has provided our Setup Assistant software to make installing your Router a simple and easy task . You can use it to get your Router up and running in minutes . The Setup Assistant requires that your Windows 2000/XP,...
  • Page 19 Connecting and Configuring your Router Step 1 Hardware Connections – Follow the Quick Installation Guide (QIG) Unplug your modem’s power cord . Put the Router next to the modem . Raise the Router’s antennas . Locate the networking cable that connects your modem and computer .
  • Page 20 Connecting and Configuring your Router Step 2 Set Up the Router – Run the Setup Assistant Software Shut down any programs that are running on your computer at this time . Turn off any firewall or Internet-connection-sharing software on your computer . I nsert the CD into your computer. The Setup Assistant will automatically appear on your computer’s screen within 15 seconds . Click on “Go” to run the Setup Assistant .
  • Page 21 Connecting and Configuring your Router Confirmation Screen Verify that you have completed all QIG steps by checking the box to the right of the arrow . Click “Next” to continue . Progress Screen Setup Assistant will show you a progress screen each time a step in the setup has been completed .
  • Page 22 Connecting and Configuring your Router 1.1 Checking Settings The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet. 1.2 Verifying Hardware Connections The Setup Assistant will now verify your hardware connection .
  • Page 23 Connecting and Configuring your Router 1.3 Naming your Wireless Network The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect . You can either use the default or change it to something unique .
  • Page 24 Connecting and Configuring your Router 1.5 Configuring the Router The Setup Assistant will now configure your Router by sending data to the Router and restarting it . Wait for the on-screen instructions . Note: Do not disconnect any cable or power off the Router while the Router is rebooting .
  • Page 25 Connecting and Configuring your Router Congratulations You have finished installing your new Belkin Router . You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website . You can use the Setup Assistant to set up your other wired and wireless computers to connect to the Internet by clicking “Next”. If you decide to...
  • Page 26 Connecting and Configuring your Router Troubleshooting If the Setup Assistant is not able to connect to the Internet, you will see the following screen . Follow the on-screen instructions to go through the troubleshooting steps . 1.7 Optional: Assistance Connecting Other Computers This optional step will help you to connect additional wired and wireless computers to your network .
  • Page 27 Connecting and Configuring your Router Congratulations Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working. You can now surf the Internet. Click “Next” to take you back to the main menu .

  • Page 28: Alternate Setup Method

    Alternate Setup Method The Web-Based Advanced User Interface is a web-based tool that you can use to set up the Router if you don’t want to use the Setup Assistant . You can also use it to manage advanced functions of the Router. From the Web-Based Advanced User Interface, you can perform the following tasks: • View the Router’s current settings and status • Configure the Router to connect to your ISP with the settings that they provided you • Change the current network settings such as the Internal IP address, the IP address pool, DHCP settings, and more • Set the Router’s firewall to work with specific applications (port...
  • Page 29 Alternate Setup Method Mac or PC computer that was originally connected to the cable or DSL modem Existing networking cable (came with modem) To power adapter Network cable (to modem) Step 2 Configure the Router Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (you do not need to type in anything else such as “http://”...
  • Page 30 Alternate Setup Method Logging out of the Router Only one computer can log into the Router at any given time for the purposes of making changes to the settings of the Router . Once a user has logged in to make changes, there are two ways that the computer can be logged out .
  • Page 31 Alternate Setup Method (11) (10) Quick-Navigation Links You can go directly to any of the Router’s UI pages by clicking directly on these links . The links are divided into logical categories and grouped by tabs to make finding a particular setting easier . Clicking on the header of each tab will show you a short description of the tab’s functions .
  • Page 32 Alternate Setup Method you are logged into the Router, you can make changes to the settings . When you are finished making changes, you can log out of the Router by clicking the “Logout” button . For more information about logging into the Router, see the section called “Logging into the Router”...
  • Page 33 Alternate Setup Method Step 3 Configure your Router for Connection to your Internet Service Provider (ISP) The “Internet/WAN” tab is where you will set up your Router to connect to your Internet Service Provider (ISP). The Router is capable of connecting to virtually any ISP’s system, provided you have correctly configured the Router’s settings for your ISP’s connection type. Your ISP connection settings are provided to you by your ISP. To configure the Router with the settings that your ISP gave you, click “Connection Type” (A) on the left side of the screen . Select the connection type you use. If your ISP gave you DNS settings, clicking “DNS” (B) allows you to enter DNS address entries for ISPs that require specific settings . Clicking “MAC Address” (C) will let you clone your computer’s MAC address or type in a specific WAN MAC address, if required by your ISP. When you have finished making settings, the “Internet Status” indicator will read “Connected” if your...
  • Page 34 Alternate Setup Method Setting your Connection Type From the “Connection Type” page, you can select the type of connection you use . Select the type of connection you use by clicking the button next to your connection type and then clicking “Next” Setting your Internet Service Provider (ISP) Connection Type to Dynamic IP A dynamic connection type is the most common connection type used with cable modems .
  • Page 35 Alternate Setup Method Change WAN MAC Address If your ISP requires a specific MAC address to connect to the service, you can enter a specific MAC address or clone the current computer’s MAC address through this link .
  • Page 36 Alternate Setup Method Setting your Internet Service Provider (ISP) Connection Type to Static IP A static IP address connection type is less common than other connection types. If your ISP uses static IP addressing, you will need your IP address , subnet mask , and ISP gateway address . This information is available from your ISP or on the paperwork that your ISP left with you. Type in your information, then click “Apply Changes” . After you apply the changes, the “Internet Status” indicator will read “Connected” if your Router is set up properly . IP Address Provided by your ISP. Enter your IP address here.
  • Page 37 Alternate Setup Method Setting your ISP Connection Type to PPPoE Most DSL providers use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your ISP may use PPPoE to log you into the service. If you have an Internet connection in your home or small office that doesn’t require a modem, you may also use PPPoE . Your connection type is PPPoE if: Your ISP gave you a user name and password, which is required to connect to the Internet; Your ISP gave you software such as WinPOET or Enternet300 that you use to connect to the Internet; or You have to double-click on a desktop icon other than your browser to get on the Internet.
  • Page 38 Alternate Setup Method Service Name A service name is rarely required by an ISP. If you are not sure if your ISP requires a service name, leave this blank. The MTU setting should never be changed unless your ISP gives you a specific MTU setting . Making changes to the MTU setting can cause problems with your Internet connection including disconnection from the Internet, slow Internet access, and problems with Internet applications working properly. Maximum Idle Time This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time . For instance, placing a check mark next to this option and entering “5”...
  • Page 39 Alternate Setup Method Setting your Internet Service Provider (ISP) Connection Type to Point-to-Point Tunneling Protocol (PPTP) [European Countries Only]. Some ISPs require a connection using PPTP protocol, a type of connection most common in European countries. This sets up a direct connection to the ISP’s system. Type the information provided by your ISP in the space provided. When you have finished, click “Apply Changes” . After you apply the changes, the “Internet Status” indicator will read “Connected” if your Router is set up properly .
  • Page 40 Alternate Setup Method User ID Provided by your ISP. Enter your PPTP User ID here. Password Provided by your ISP. Type in your password here. PPTP Gateway Provided by your ISP. Enter your PPTP gateway/service IP address here . Idle Time Out This feature is used to automatically disconnect the Router from your ISP when there is no activity for a specified period of time. For instance, entering “10” into the minute field will cause the Router to disconnect from the Internet after 10 minutes of no Internet activity. This option should be used if you pay for your Internet service by the minute.
  • Page 41 Alternate Setup Method IP Address Provided by your ISP. Enter the IP address here. Subnet Mask Provided by your ISP. Enter the IP address here. Default Gateway Provided by your ISP. Enter the gateway address here.
  • Page 42 Alternate Setup Method Setting your Connection Type if you are a Telstra BigPond User ® [Australia Only] . Your user name and password are provided to you by Telstra BigPond . Enter this information below . User Name Provided by your ISP. Type in your user name here. Password Type in your password and retype it into the “Retype Password”...
  • Page 43 Alternate Setup Method Setting Custom Domain Name Server (DNS) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Locators (URLs) like “www .belkin . com” into IP addresses. Many Internet Service Providers (ISPs) do not require you to enter this information into the Router . The “Automatic from ISP” box (1) should be checked if your ISP did not give you a specific DNS address. If you are using a static IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly. If your connection...
  • Page 44 Provider may record the MAC address of your computer’s adapter and only let that particular computer connect to the Internet service. When you install the Router, its own MAC address will be “seen” by the ISP and may cause the connection not to work. Belkin has provided the ability to clone (copy) the MAC address of the computer into the Router. This MAC address, in turn, will be seen by the ISP’s system as the original MAC address and will allow the connection to work. If you...
  • Page 45 Alternate Setup Method Cloning your MAC Address To clone your MAC address, make sure that you are using the computer that was ORIGINALLY CONNECTED to your modem before the Router was installed . Click the “Clone” button . Click “Apply Changes” . Your MAC address is now cloned to the Router . Entering a Specific MAC Address In certain circumstances you may need a specific WAN MAC address.

  • Page 46: Using The Web-Based Advanced User Interface

    Using the Web-Based Advanced User Interface Using your Internet browser, you can access the Router’s Web-Based Advanced User Interface. In your browser, type “192.168.2.1” (do not type in anything else such as “http://” or “www”), then press the “Enter” key . You will see the Router’s home page in your browser window .
  • Page 47 Using the Web-Based Advanced User Interface Viewing the LAN Settings Clicking on the header of the “LAN Setup” tab will take you to its header page . A quick description of the functions can be found here . To view the settings or make changes to any of the LAN settings, click on (2), “LAN Settings”...

  • Page 48: Changing Lan Settings

    0 and 255) . Subnet Mask There is no need to change the subnet mask . This is a unique, advanced feature of your Belkin Router. It is possible to change the subnet mask if necessary; however, do make changes to the subnet mask unless you have a specific reason to do so . The...
  • Page 49 Local Domain Name The default setting is “Belkin” . You can set a local domain name (network name) for your network . There is no need to change this setting unless you have a specific advanced need to do so .

  • Page 50: Viewing The Dhcp Client List Page

    Using the Web-Based Advanced User Interface Viewing the DHCP Client List Page You can view a list of the computers (known as clients), which are connected to your network. You are able to view the IP address the computer, the host name (if the computer has been assigned one), and the MAC address of the computer’s network interface card (NIC). Pressing the “Refresh”...

  • Page 51: Configuring The Wireless Network Settings

    Using the Web-Based Advanced User Interface Configuring the Wireless Network Settings Clicking on the header of the “Wireless” tab will take you to the “Wireless” header page . From this page, the Router’s wireless radio can be enabled or disabled (the default setting is enabled) . Under the “Wireless”...
  • Page 52 Using the Web-Based Advanced User Interface Changing the Wireless Network Name (SSID) To identify your wireless network, a name called the SSID (Service Set Identifier) is used. The default SSID of the Router is “belkin54g”. You can change this to anything you want to or you can leave it unchanged. If there are other wireless networks operating in your area, you will want to make sure that your SSID is unique (does not match that of another wireless network in the area). To change the SSID, type the SSID that you want to use in the “SSID” field (1) and click “Apply Changes” (2) . The change is immediate. If you make a change to the SSID, your wireless- equipped computers may also need to be reconfigured to connect to your new network name .
  • Page 53 Using the Web-Based Advanced User Interface Using the Wireless Mode Switch Your Router can operate in three different wireless modes: “Mixed (11b+11g)”, “11g Only”, and “11b Only” . The different modes are explained below . Mixed (11b+11g) Mode In this mode, the Router is compatible with 802.11b and 802.11g wireless clients simultaneously . This is the factory default mode and ensures successful operation with all Wi-Fi-compatible devices. If you have a mix of 802 .11b and 802 .11g clients in your network, we recommend setting the Router to mixed (11b+11g) mode .
  • Page 54 Using the Web-Based Advanced User Interface Changing the Wireless Channel There are a number of operating channels you can choose from. In the United States, there are 11 channels. In Australia, the United Kingdom, and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements . Your Router is configured to operate on the proper channels for the country you reside in . The default channel is “Auto” . The channel can be changed if needed. If there are other wireless networks operating in your area, your network should be set to operate on a channel that is different than the other wireless networks .
  • Page 55 Using the Web-Based Advanced User Interface Protected Mode Switch As part of the 802 .11g specification, Protected mode ensures proper operation of 802 .11g clients and access points when there is heavy 802 .11b traffic in the operating environment . When Protected mode is ON, 802 .11g scans for other wireless network traffic before it transmits data .

  • Page 56: Securing Your Wi-Fi Network

    Using the Web-Based Advanced User Interface Securing your Wi-Fi Network ® Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears . This section is intended for the home, home office, and small office user .
  • Page 57 Most of the new wireless equipment in the market today supports both 64-bit and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP . All Belkin wireless products will support both 64-bit and 128-bit WEP .
  • Page 58 Using the Web-Based Advanced User Interface Sharing the Same Network Keys Most Wi-Fi products ship with security turned off . So once you have your network working, you need to activate WEP or WPA and make sure your wireless networking devices are sharing the same network key . The following diagram shows the effect of not having the correct network key throughout your network .
  • Page 59 Using the Web-Based Advanced User Interface Using a Hexadecimal Key A hexadecimal key is a combination of numbers and letters from A–F and 0–9 . 64-bit keys are five two-digit numbers . 128-bit keys are 13 two-digit numbers . For instance: AF 0F 4B C3 D4 = 64-bit key C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key In the boxes below, make up your key by writing in two characters...

  • Page 60: Wep Setup

    Using the Web-Based Advanced User Interface WEP Setup 64-Bit WEP Encryption Select “WEP” from the “Security” menu’s “Allowed Client Type” . Select “64 bit” from the drop-down menu in “WEP Mode” . After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually, or you can put a check mark in “Passphrase”, then type in your passphrase .
  • Page 61 Using the Web-Based Advanced User Interface 128-Bit WEP Encryption Note to Mac users: The passphrase option will not operate with Apple AirPort . To configure encryption for your Mac computer, set the encryption using the manual method described in the next section . Select “WEP”...

  • Page 62: Using Wi-Fi Protected Setup

    Using the Web-Based Advanced User Interface Changing the Wireless Security Settings Your Router is equipped with the latest security standard called Wi-Fi Protected Access 2 (WPA2) and the legacy security standard called Wired Equivalent Privacy (WEP) . Your Router also supports the Wi-Fi Protected Setup (WPS) specification, which simplifies the setup of a wireless network .
  • Page 63 Using the Web-Based Advanced User Interface Wi-Fi Protected Setup (WPS): Enabled or Disabled . Personal Identification Number (PIN) Method: In this method, a wireless client wishing to access your network must supply an 8-digit PIN to the Router . After clicking “Enroll”, you must start the WPS handshaking procedure from the client within two minutes . R outer PIN: If an external registrar is available, you may enter in the Router’s PIN to the registrar. Click “Generate New PIN” to change the PIN from the default value. Click “Restore Default PIN” to reset the PIN value. Push Button Configuration (PBC) Method: PBC is an alternate method `to connect to a WPS network .

  • Page 64: Wpa Setup

    . This patch works only with the Windows XP operating system . ® You also need to download the latest driver for your Belkin Wireless G Desktop or Notebook Network Card from the Belkin support site . Other operating systems are not supported at this time . Microsoft’s patch only supports devices with WPA-enabled drivers such as Belkin 802 .11g...

  • Page 65: Setting Wpa/Wpa2

    Using the Web-Based Advanced User Interface Setting WPA/WPA2 Select “WPA/WPA2” from the “Allowed Client Type” drop-down box . Select “Password (PSK)” from the “Authentication” drop-down box . Then, select “Passphrase (8–63 characters)” from the “Password (PSK) type” drop-down box . Enter your pre-shared key .
  • Page 66 Using the Web-Based Advanced User Interface Setting up WPA for Wireless Desktop and Wireless Notebook Cards that are NOT Manufactured by Belkin If you do NOT have a Belkin WPA Wireless Desktop or Wireless Notebook Card and it is not equipped with WPA-enabled software, a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access”...
  • Page 67 Using the Web-Based Advanced User Interface Setting up Windows XP Wireless Network Utility to use WPA-PSK In order to use WPA-PSK, ensure you are using the Windows Wireless Network Utility by doing the following: Under Windows XP, click “Start > Control Panel > Network Connections” . Right-click on “Wireless Network Connection Properties” and select “Properties”...
  • Page 68 Using the Web-Based Advanced User Interface Under the “Wireless Networks” tab, click the “Configure” button and you will see the following screen . For a home or small business user, select “WPA-PSK” under “Network Authentication” . Note: Select “WPA” if you are using this computer to connect to a corporate network that supports an authentication server such as a radius server .

  • Page 69: Using The Access Point Mode

    Using the Web-Based Advanced User Interface Using the Access Point Mode Note: This advanced feature should be employed by advanced users only . The Router can be configured to work as a wireless network access point. Using this mode will defeat the NAT IP sharing feature and DHCP server. In Access Point (AP) mode, the Router will need to be configured with an IP address that is in the same subnet as the rest of the network that you will bridge to. The default IP address is 192 .168 .2 .254 and subnet mask is 255 .255 .255 .0 . These can be customized for your need .

  • Page 70: Configuring The Firewall

    Using the Web-Based Advanced User Interface Configuring the Firewall Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • SYN flood • Land Attack • UDP flooding • Ping of Death (PoD) • Tear Drop Attack • Denial of Service (DoS) • ICMP defect • IP with zero length • RIP defect • Smurf Attack • Fragment flooding • TCP Null Scan...
  • Page 71 Using the Web-Based Advanced User Interface Configuring Internal Forwarding Settings The “Virtual Servers” function will allow you to route external (Internet) calls for services such as a web server (port 80), FTP server (Port 21), or other applications through your Router to your internal network . Since your internal computers are protected by a firewall, computers outside your network (over the Internet) cannot get to them because they cannot be “seen .”...
  • Page 72 Using the Web-Based Advanced User Interface Setting Client IP Filters The Router can be configured to restrict access to the Internet, email, or other network services . Restriction can be set for a single computer, a range of computers, or multiple computers . To restrict Internet access to a single computer, for example, click on “Add PC” (1) and enter the last digits of the IP address of the computer(s) to which you wish to restrict access in the “Client PC IP Address” fields on the next page (2) . Next, select the type of traffic you want to block in the list (3). If the type of traffic you want to block is not provided in the list, you can enter the specific protocol and port numbers at the bottom of the page .
  • Page 73 Using the Web-Based Advanced User Interface...

  • Page 74: Setting Mac Address Filtering

    Using the Web-Based Advanced User Interface Setting MAC Address Filtering The MAC address filter is a powerful security feature that allows you to specify which computers are allowed on the network . Any computer attempting to access the network that is not specified in the filter list will be denied access .

  • Page 75: Enabling The Dmz

    Using the Web-Based Advanced User Interface Enabling the Demilitarized Zone (DMZ) The DMZ feature allows you to specify one computer on your network to be placed outside of the firewall . This may be necessary if the firewall is causing problems with an application such as a game or video conferencing application .
  • Page 76 Using the Web-Based Advanced User Interface WAN Ping Blocking Computer hackers use what is known as “pinging” to find potential victims on the Internet. By pinging a specific IP address and receiving a response from the IP address, a hacker can determine that something of interest might be there. The Router can be set up so it will not respond to an ICMP ping from the outside . This heightens the level of security of your Router . To turn off the ping response, select “Block ICMP Ping” and click “Apply Changes”. The Router will not respond to an ICMP ping.

  • Page 77: Utilities Tab

    Using the Web-Based Advanced User Interface Utilities Tab This screen lets you manage different parameters of the Router and perform certain administrative functions .

  • Page 78: Restarting The Router

    Using the Web-Based Advanced User Interface Restarting the Router Sometimes it may be necessary to restart or reboot the Router if it begins working improperly . Restarting or rebooting the Router will NOT delete any of your configuration settings . Restoring Factory Default Settings Using this option will restore all of the settings in the Router to the factory (default) settings. It is recommended that you back up your...
  • Page 79 Using the Web-Based Advanced User Interface Saving a Current Configuration You can save your current configuration by using this feature . Saving your configuration will allow you to restore it later if your settings are lost or changed . Click “Save” . A window called “File Download” will open . Click “Save”...
  • Page 80 Using the Web-Based Advanced User Interface A window will open that allows you to select the location where you want to save the configuration file . Select a location . You can name the file anything you want, or use the default name . Be sure to name the file so you can locate it yourself later .
  • Page 81 Using the Web-Based Advanced User Interface Restoring a Previous Configuration This option will allow you to restore a previously saved configuration . Click “Browse” . A window will open that allows you to select the location of the configuration file . All configuration files end with a “...
  • Page 82 Using the Web-Based Advanced User Interface Please wait while the Router loads the configuration file . The Router’s home page should appear automatically. If not, type the Router’s address (default = 192 .168 .2 .1) into the navigation bar of your browser .

  • Page 83: Updating The Firmware

    Using the Web-Based Advanced User Interface Updating the Firmware From time to time, Belkin may release new versions of the Router’s firmware . Firmware updates contain feature improvements and fixes to problems that may exist . When Belkin releases new firmware, you can download the firmware from the Belkin update website and update your Router’s firmware to the latest version .
  • Page 84 Using the Web-Based Advanced User Interface Updating the Router’s Firmware I n the “Firmware update” page, click “Browse”. A window will open that allows you to select the location of the firmware update file .
  • Page 85 Using the Web-Based Advanced User Interface Changing System Settings The “System Settings” page is where you can enter a new administrator password, set the time zone, enable remote management, and turn on and off the UPnP function of the Router .
  • Page 86 Using the Web-Based Advanced User Interface Setting or Changing the Administrator Password The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here . Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router .
  • Page 87 Using the Web-Based Advanced User Interface Enabling Remote Management Before you enable this advanced feature of your Belkin Router, MAKE SURE YOU HAVE SET THE ADMINISTRATOR PASSWORD. Remote management allows you to make changes to your Router’s settings from anywhere on the Internet. There are two methods of remotely managing the Router . The first is to allow access to the Router from anywhere on the Internet by selecting “Any IP address can remotely...

  • Page 88: Manually Configuring Network Settings

    Manually Configuring Network Settings In order for your computer to properly communicate with your Router, you will need to change your PC’s TCP/IP settings to DHCP. Manually Configuring Network Adapters in Windows 2000, NT, XP, or Vista Click “Start”, “Settings”, then “Control Panel” . Double-click on the “Network and dial-up connections” icon (Windows 2000) or the “Network” icon (Windows XP or Vista) . Right-click on the “Local Area Connection”...
  • Page 89 Manually Configuring Network Settings Manually Configuring Network Adapters in Windows 98SE or Me Right-click on “My Network Neighborhood” and select “Properties” from the drop-down menu . S elect “TCP/IP -> settings” for your installed network adapter. You will see the following window . I f “Specify an IP address” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below . You will need to enter this information into the Router .
  • Page 90 Manually Configuring Network Settings Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Router. Set up the computer that is connected to the cable or DSL modem FIRST using these steps . You can also use these steps to add computers to your Router after the Router has been set up to connect to the Internet. Manually Configuring Network Adapters in Mac OS up to 9.x In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP.
  • Page 91 Manually Configuring Network Settings C lose the window. If you made any changes, the following window will appear . Click “Save” . Restart the computer . When the computer restarts, your network settings are now configured for use with the Router .
  • Page 92 Manually Configuring Network Settings Manually Configuring Network Adapters in Mac OS X Click on the “System Preferences” icon . Select “Network” from the “System Preferences” menu . Select “Built-in Ethernet” next to “Show” in the Network menu .
  • Page 93 Manually Configuring Network Settings S elect the “TCP/IP” tab . Next to “Configure:” , you should see “Manually” or “Using DHCP”. If you do not, check the PPPoE tab to make sure that “Connect using PPPoE” is NOT selected. If it is, you will need to configure your Router for a PPPoE connection type using your user name and password . I f “Manually” is selected, your Router will need to be set up for a static IP connection type. Write the address information in the table below . You will need to enter this information into the Router .

  • Page 94: Recommended Web Browser Settings

    Recommended Web Browser Settings In most cases, you will not need to make any changes to your web browser’s settings. If you are having trouble accessing the Internet or the Web-Based Advanced User Interface, then change your browser’s settings to the recommended settings in this section . Internet Explorer 4.0 or Higher S tart your web browser. Select “Tools” then “Internet Options”. I n the “Internet Options” screen, there are three selections: “Never dial a connection”, “Dial whenever a network connection is not present”, and “Always dial my default connection”. If you can make a selection, select “Never dial a connection”. If you cannot make a selection, go to the next step . U nder the “Internet Options” screen, click on “Connections” and select “LAN Settings…”...
  • Page 95 Recommended Web Browser Settings Make sure there are no check marks next to any of the displayed options: “Automatically detect settings”, “Use automatic configuration script”, and “Use a proxy server” . Click “OK”. Then click “OK” again in the “Internet Options” page. Netscape Navigator 4.0 or Higher ® ® Start Netscape .

  • Page 96: Troubleshooting

    Troubleshooting Problem: Installation CD does not automatically start. Solution: If the CD-ROM does not start the Setup Assistant automatically, it could be that the computer is running other applications that are interfering with the CD drive . If the Setup Assistant screen does not appear within 15–20 seconds, open up your CD-ROM drive by double-clicking on the “My Computer” icon that is located on your desktop . Next, double-click on the CD-ROM drive that the Setup Assistant Software CD has been placed in to start the installation .
  • Page 97 Troubleshooting Problem: The Setup Assistant cannot find my Router . Solution: If the Setup Assistant is not able to find the Router during the installation process, please check the following items: If the Setup Assistant is not able to find the Router during the installation process, there may be third-party firewall software installed on the computer attempting to access the Internet. Examples of third-party firewall software are ZoneAlarm, BlackICE PC Protection, McAfee Personal Firewall, and Norton Personal Firewall . If you do have firewall software installed on your computer, please make sure that you properly configure it .
  • Page 98 Troubleshooting Problem: The Setup Assistant cannot connect my Router to the Internet. Solution: If the Setup Assistant is not able to connect the Router to the Internet, please check the following items: Use the troubleshooting suggestions within the Setup Assistant . If the troubleshooting screen does not open automatically, click on the “Troubleshoot” button in the lower, right-hand corner of the Setup Assistant window . If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly . Some user names require that the ISP’s domain be at the end of the name .
  • Page 99 Unplug the power to your Router, wait 10 seconds, and then reconnect the power . This will cause the Router to reattempt communication with the modem. If the “Modem” light on the Router is not lit after completing these steps, please contact Belkin Technical Support . Try shutting down and restarting your computer . Problem: • The Setup Assistant completed installation, but my web browser doesn’t work .
  • Page 100 Belkin Technical Support . Problem: I can’t connect to the Internet wirelessly. Solution: If you are unable to connect to the Internet from a wireless computer, please do the following: Look at the lights on your Router . Your Belkin Router’s lights should be as follows: • The “Power” light should be on. • The “Internet” light should be on. • The “Modem” light should be either on or blinking .
  • Page 101 Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen. If you are also using a Belkin Wireless Card or Adapter with this Router, the tray icon should look like this: The exact window that opens will vary depending on the model of wireless card you have;...
  • Page 102 “Placement of your Router for Optimal Performance” in this User Manual . Using a computer that is connected to the Router through a network cable (as opposed to wirelessly), ensure that “Broadcast SSID” is enabled. This setting is found on the Router’s wireless “Channel and SSID” configuration page. If you are still unable to access the Internet after completing these steps, please contact Belkin Technical Support .
  • Page 103 Troubleshooting Problem: My wireless network performance is inconsistent . Data transfer is sometimes slow . Signal strength is poor . I am having difficulty establishing and/or maintaining a Virtual Private Network (VPN) connection . Solution: Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases .
  • Page 104 Range Extender/Access Point that can be connected wirelessly to a Belkin Wireless G Router, without requiring an Ethernet cable or Powerline Ethernet Adapters . These Belkin products are available at your local retailer, or can be ordered from Belkin directly . For network/range extension information, please visit: www .belkin .com/networking to find out more about:...
  • Page 105 Troubleshooting Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin Wireless Router or Belkin Access Point . Solution: Log into your Wireless Router or Access Point . Open your web browser and type in the IP address of the Wireless Router or Access Point . (The Router’s default is 192 .168 .2 .1, the Access Point’s default is 192 .168 .2 .254 .) Log into your Router by clicking on the “Login”...
  • Page 106 Troubleshooting Problem: I am having difficulty setting up Wired Equivalent Privacy (WEP) security on a Belkin client card (Wireless Network Card or Adapter) . Solution: The client card must use the same key as the Wireless G Router or access point . For instance, if your Wireless Router or access point uses the key 00112233445566778899AABBCC, then the client card must be set to the exact same key .
  • Page 107 .microsoft .com/downloads/details . aspx?FamilyID=009d8425-ce2b-47a4-abec- 274845dc9e91&displaylang=en You also need to download the latest driver for your Belkin Wireless 802 .11g Desktop or Notebook Network Card from the Belkin support site . Other operating systems are not supported at this time .
  • Page 108 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin Wireless Router or Belkin Access Point for a home network . Solution: From the “Security Mode” drop-down menu, select “WPA-PSK (no server)” . For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up .
  • Page 109 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a home network . Solution: Clients must use the same key that the Wireless G Router or access point uses . For instance, if the key is “Smith Family Network Key”...
  • Page 110 Troubleshooting Problem: I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a Belkin client card (Wireless Network Card or Adapter) for a business . Solution: Double-click the “Signal Indicator” icon to bring up the “Wireless Network Utility” screen . The “Advanced” button will allow you to view and configure more options of your client card .
  • Page 111 Troubleshooting Supported Operating Systems: • Windows XP Professional • Windows XP Home Edition Enabling WPA-PSK (no server) In systems running Windows XP, click “Start > Control Panel > Network Connections” . Right-click on the “Wireless Networks” tab . The “Wireless Network Connection Properties” screen appears . Ensure the “Use Windows to configure my wireless network settings” box is checked .
  • Page 112 Troubleshooting What’s the difference between 802.11b, 802.11g, 802.11a, and Draft-N? Currently there are four levels of wireless networking standards, which transmit data at very different maximum speeds . Each is based on the designation 802.11(x), so named by the IEEE, the board that is responsible for certifying networking standards . The most common wireless networking standard, 802 .11b, transmits information at 11Mbps;...
  • Page 113 Troubleshooting Wireless Comparison Chart 11Mbps 54Mbps 54Mbps Up to 300Mbps Common Common Common household household household devices such devices such devices such as as cordless as cordless 5GHz— cordless phones phones and phones and uncrowded and microwave microwave microwave band ovens may ovens may ovens may...
  • Page 114 Troubleshooting Technical Support You can find technical support information at http://www.belkin.com/ networking or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call: 877-736-5771 800-223-5546 ext. 2263 310-898-1100 ext. 2263 0845 607 77 87 Australia: 1800 235 546 New Zealand:...

  • Page 115: Information

    ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that this device, F5D7230-4 to which this declaration relates, complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device...

  • Page 116: Fcc Radiation Exposure Statement

    2 .4GHz operation of this product in the USA is firmware-limited to channels 1 through 11 . Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin International, Inc., may void the user’s authority to operate the equipment . Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Canada. This Class B digital apparatus complies with Canadian ICES-003.
  • Page 117 • EN 300 328—Technical requirement for radio equipment • EN 301 489—General EMC requirements for radio equipment. To determine the type of transmitter, check the identification label on your Belkin product . Products with the CE marking comply with the EMC Directive (89/336/EEC) and the Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community . Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards) .
  • Page 118 What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product) . Belkin reserves the right to discontinue any of its products without notice, and disclaims any limited warranty to repair or replace any such discontinued products. In the event...
  • Page 119 Information Belkin reserves the right to review the damaged Belkin product . All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment .
  • Page 120 Australia: 1800 235 546 +61 (0) 2 4350 4700 fax New Zealand: 0800 235 546 Belkin B.V. Singapore: 65 64857620 Europe: www .belkin .com/support Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands Belkin International, Inc. +31 (0) 20 654 7300...

Table of Contents