Sears Kenmore 385.19030 Owner's Manual page 68

• Corded Buttonhole
Usethe sameprocedureas sensorbuttonhole.
'_'Setthe stitch width to match the thicknessof the
cord used°
With the buttonholefoot raised,hook the filler
cord on the spurat the back of the buttonholefoot..
Bringthe endstowardyou underthe buttonhole
foot, clearingthe front end_
Hookthe fillercord into the forkson the front of
automaticbuttonholefoot R to hold them tight.
Lowerthe needleinto the garmentwherethe
buttonholewill start and lowerthe foot,
Depressthe foot controlgentlyand sew the
buttonhole°Eachside of the buttonholeand the
barrackswill be sewnoverthe cord_
Removethe fabric fromthe machineand cut the
sewingthreadsonlyo
(_ R:Automatic buttonhole foot
(_)Spur
Q Needle thread
(_ Bobbin thread
BHI
D
I B.,. 1-511
Pull the left end of the filler cord to tighten iL
Thread the end through a darning needle, draw to the
wrong side of the fabric and cut..
'_' To cut the buttonhole opening, refer to the
instructions on page 56.
f
6O