Infrared - Sharp SX833 User Manual

To Turn Off Automatically
→
"Connectivity" "Bluetooth"
→
"Bluetooth Timeout"
1.
Select the desired time.
Your phone turns the function off automatically in the
specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the phone.
→
"Connectivity" "Bluetooth"
→
"Handsfree Setting"
1.
Select "Private mode" or "Handsfree mode".
"Private mode":
"Handsfree mode":
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX data to
authenticate the passcode (exchanging the passcode) before
pairing devices.
→
"Connectivity" "Bluetooth"
→
"Authentication"
1.
Select "On" or "Off".
Note
• No authentication is required for the paired devices.
• Even if you select "Off", you may authenticate the passcode
when the sender requests it.
→
"Bluetooth Settings"
→
"Bluetooth Settings"
For talking with the handset
For talking with the handsfree kit
→
"Bluetooth Settings"
To See Your Phone Details
→
"Connectivity" "Bluetooth"
→
"My Phone Details"

Infrared

(M 12-2)
In order to use the infrared function, you need to search for
other infrared enabled devices to establish contact with your
phone. Keep your phone within a distance of 20 centimetres
from the devices before searching. The infrared setting will
return to off when no data is transmitted/received via infrared
communication.
Turning On or Off
→
"Connectivity" "Infrared"
1.
Select "On" or "Off".
The infrared setting is activated, and "
Sending All Data
→
"Connectivity" "Infrared"
1.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "To Change the Handset
Code" on page 116.
2.
Select the desired data to send.
3.
Enter the authorisation code.
→
"Bluetooth Settings"
→
"Switch On/Off"
" is displayed.
→
"Send All"
Connectivity 121