Connectivity; Bluetooth - Sharp SX833 User Manual

Connectivity

(M 12)
By configuring the settings in this menu, you can connect to
Bluetooth wireless technology or infrared enabled phones via
these connections, as well as a PC via Bluetooth wireless
technology or infrared connections.

Bluetooth

(M 12-1)
For using the Bluetooth wireless function, you need to search
for other Bluetooth wireless technology enabled devices to
establish contact with your phone. Keep your phone within a
distance of 10 metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off
→
"Connectivity" "Bluetooth"
1.
Select "On" or "Off".
The Bluetooth wireless setting is activated, and "
displayed.
To Show or Hide Your Phone
→
"Connectivity" "Bluetooth"
1.
Select the desired visibility settings.
"Show My Phone":
"Hide My Phone":
→
"Switch On/Off"
" is
→
"Visibility"
Allows other devices to
recognise your phone.
Hides your phone from other
devices.
To Search for Devices to be Paired
→
"Connectivity" "Bluetooth"
The phone starts searching for devices within 10 metres. A
maximum of 16 devices can be searched for and listed on the
display.
1.
Select the desired device for pairing.
2.
Enter the device passcode.
Note
• If the Bluetooth wireless function is off before searching, the
phone turns the Bluetooth wireless function on automatically
and starts searching.
• You can only select one device for pairing. To change the
paired device, see "To Activate the Paired Device" on
page 120.
Tip
• You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in "To Turn On or Off" on this page or in "To Turn
Off Automatically" on page 121.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select "Transfer Audio"
and then "To Bluetooth" or "To Handset".
→
"Search for Devices"
Connectivity 119