Sharp SX833 User Manual page 107

Setting the Display Saving
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the
Display Saving goes into effect, which will help conserve
battery life.
Tip
• When you purchase this phone, Display Saving is set to 2
minutes.
→
"Settings" "Display Settings"
1.
Select the desired time.
Note
• Display Saving does not work while you are making a call,
using WAP, or using an application.
• To cancel the Display Saving: The display saving continues
until either a key is pressed or there is an incoming alert. The
first key press only cancels this function. You must press
another key in order to enter any numerical or text value.
Setting Video Out
With the optional cable, you can connect your phone to other
device, such as TVs or videos set to output, and display images
or video clips stored on your phone. It is also possible to output
and display data stored in the memory card.
→
"Display Saving"
To Set Output Function On
You need to connect your phone to the other device with the
optional cable beforehand.
→
"Settings" "Display Settings"
"Switch On/Off"
1.
Select "On".
Select "Off" on the Output screen when finished.
Note
• When closing your phone, you cannot output data to the
connected device.
• It is not possible to output some images or video clips.
To Select Display Size
You can display images in enlarged size.
→
"Settings" "Display Settings"
"Display Size"
1.
Select "Enlarge".
To display in original size, select "Original Size".
→ →
"Video Output"
→ →
"Video Output"
Settings 107