Navigating Functions - Sharp SX833 User Manual

Navigating Functions

All applications are accessed from the Main menu. To open the
Main menu, press the centre key (
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays Back. To close the Main menu, press the right soft key
if it displays Exit.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to select. Open subsection items after
opening those listed in the main section.
Example:
→
"Call Manager" "Phonebook"
20 Navigating Functions
) in standby.
→
"Add New"
Using in the Viewer Position of the Display
Available keys in viewer position of the display are V, W, X,
Y and Z.
To open the Main menu, press Y in standby.
To select a menu item (indicated in quotation marks), press V
or W, and press Y to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. The left soft key is X and
the right soft key is Z.
The side keys function in camera mode as follows:
V / W : Zoom-in/Zoom-out
X:
Options
Y:
Capture
Z:
Switches between the photo camera and video
camera modes.