Attachments - Kenmore 116.31100 Use & Care Manual

t ATTACHMENTS
CAUTRON
DO NOT use the hose when vacuum cleaner
handle is tilted back into the floor cleaning
position.
Always return the vaccum cleaner to the
upright position before using the hose and
altachmenls_
Failure to do so may result in overheating of
the agitator motor and
can cause
the thermal
protector to trip
TO USE ATTACHMENTS
1. Place the vacuum cleaner in the
upright position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Hose
Hose
Handle
3. Use attachments as needed. See
ATTACHMENT USE TABLE.
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
Hose
Release
Lever
CAUTION
When using attachments, be careful not to
overextend the stretch hose when reaching.
Trying to reach beyond the hose stretch
capability could cause the vacuum cleaner
to tip over.
CAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Property damage or
personal injury could result.
TELESCOPING WAND
1. The wand length
is adjustable and
requires no
assembly. To adjust,
simply push down
on the wand handle
and slide the upper
wand to the desired
height.
2. Extend wand to
desired length.
COMBINATION BRUSH
The combination brush can be attached
directly to the wand°
_-Cornbinafion _
Brush Brush J
Holder
Use the brush holder without the brush
for greater suction on furniture cushions
or stairs.
Use brush holder with brush for cleaning
loose surfaces such as drapes.
12