Suggested Pileheight Settings - Sears Kenmore Vacuum Cleaner Owner's Manual

TOSTART
Personal Injury and Product Damage Hazard
• DO NOT plug In If switch is in ON position.
Personal injury or damage could result.
• The cord moves rapidly when rewinding. Keep
children away and provide o clear path when
rewinding the cord to prevent personal injury.
• DO NOT use outlets above counters. Damage to
Items in F4Jrrounding area could occur.
1. Pull cord out
of canister to
desired length.
2. Snap cord
into grip to
prevent
accidental
rewinding.
NOTE:To reduce the risk of electric shock, this
vacuum cleaner has a polarized plug, one blade is
wider than the other. Thisplug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
3. Plugthe polarized power cord into120 Voltoutlet
located near the floor.
To rewind: Unplug the cleaner. Hold the plug while
rewinding to prevent damage or injun/from the
moving cord. A slight tug will release the locking
pawls in the cord reel allowing it to retract.
Handle Pile Height
Release Pedal Pedal
4. Lower wand from upright position b y pressing on
the handle releasepedal.
5. Selecta pileheightsetting by pressing the small
pedal on the rearof the POWER-MATE
TM,
The pile
heightsetting s hows on the indicator, See
SUGGESTED PILEHEIGHT SETTINGS,
On/Off
Sw/tch
6.To turnunit on,
step on the On/Off
switch,
SOME MODELS
To turnon POWER-
MATE
TM,
move the
On/Off switchto the
ON position,