Advertisement
Available languages
Available languages
Review this
table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
WARNING
Always
turn
off
and
unplug
vacuum
cleaner
before
performing
maintenance
to the
vacuum
cleaner.
Failure
to do so could
result
in electrical
shock
or personal
injury.
Vacuum cleaner won't
start.
I.
2.
Poor job of dirt
I.
pick=up.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Vacuum cleaner starts
but shuts off.
PowerMate will not
run when attached.
Unplugged
at wall outlet.
Tripped circuit breaker/blown
fuse at household service panel.
Loose hose electrical
connections.
Full or clogged dust bag.
Clogged airflow passages.
Dirty filters.
Wrong pile height setting.
Wrong power level selected.
Hole in hose.
Worn PowerMate agitator.
Worn or broken belt.
Dirty agitator or end caps.
Tripped overload protector in
PowerMate.
I. Hose or hood electrical
connections.
2. Tripped overload protector in
PowerMate.
3. Tripped thermal protector
in canister.
I. PowerMate connections
unplugged.
2. Worn or broken belt.
3. Dirty agitator or end caps.
4. Tripped overload protector in
PowerMate.
5. Switch not in CARPET position.
I. Change bag. (age
21}
2. Clear airflow passages. (page 20
3. Change filters. (t::age 22,_23
4. Adjust setting. (page 1 14
5. Adjust control. (I: age 12
6. Replace hose.
Z Change agitator. (pag
24.25 /
8 & 9. See BELTCHANGING AND
AGITATOR CLEANING. (pa_
24_ 25
10. Remove any items that may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset./page 19_26
I. Check connections, reconnect hose
ends.(page 910}
2. Remove any items that may be
caught or jammed, then reset. If
vacuum cleaner starts and stops
again, clean agitator and end caps,
then reset./age
9, 26
3. See PERFORMANCE FEATURES-
"Thermal Protector." pag_ 19
I.
2&3.
4.
5.
Plug in firmly. (page 10)
See BELT CHANGING
AND
AGITATOR
CLEANING
(_age
2425.
Remove
any items that
may
be
caught
or jammed,
then reset.
If
vacuum
cleaner
starts
and stops
again,
clean agitator
and end caps,
then reset. (ag
9,
26
Move switch
to CARPET
position.
pa
12
- 27 -
Advertisement
