Advertisement
Available languages
Available languages
LIGHT BULB CHANGING
WARNING
Electrical
Shock Or Personal
injury
Hazard
Turn off and unplug vacuum
cleaner
before
performing
maintenance
to the
vacuum
cleaner.
Failure to do so could
result in electrical
shock or personal
injury from the vacuum
cleaner
suddenly
starting.
Do not plug in or turn on until the vacuum
1. Remove
PowerMate
® cover
as shown
in BELT
CHANGING
AND
AGITATOR
CLEANING
section.
----_Pull
out to
I
left side
2. Remove
the light
bulb
by pulling
straight
out.
CAUTION
Do not use a bulb rated over 9W (13V).
During
extended
use, heat from the
bulb could overheat
surrounding plastic
)arts.
Push in
to right
3. To replace
the
light bulb,
carefu!ly
insert fully into slot.
4. Reinstall PowerMate ® cover as shown in
BELTCHANGING AND AGITATOR CLEANING
section.
NOTE:
See PARTS AND
FEATURES for Bulb
number.
AGITATOR SERViCiNG
TO CHECK THE BRUSHES
When
brushes are worn to the level of the
base support
bars, replace
the agitator
assembly.
New
Brushes
Worn
Brushes
Bose
Support
Bar
TO REPLACE AGITATOR
ASSEMBLY
1. Remove PowerMate cover, belt and
agitator assembly. See "To Remove Belt" in
BELTCHANGING AND AGITATOR
CLEANING (page 24-25).
2. Replace agitator assembly. See the
separate
repair parts
list for part number.
3. Reinstall belt and PowerMate
cover. See
"To replace
belt" in BELT CHANGING
AND
AGITATOR
CLEANING
(page 24-25).
- 26 -
Advertisement
