Addonics Technologies NAS40ESU User Manual page 14

Upgrade the System Firmware
In the case of a firmware update release, this utility applies the update.
Update will not proceed unless only one volume (one partition on one drive) is
present. Instructions on updating firmware are provided with the firmware
update.
Caution: All of the NAS 4.0 unit's settings will be lost in the process of applying
firmware. Make sure to notify any and all users this will be done to prevent data loss
and use the Backup Internal System Configuration Information utility before
proceeding.
The Sharing Tab
User Management
Shows current list of known users on the NAS 4.0 unit.
To delete a user, click the "Delete" link next to that username, then confirm.
To change a user's password, select the username just above "New Password," then
enter the new password into the "New Password" and "Confirm Password" fields and
click "Change Password."
To create a new user account, click "New User," then enter the new username and
the initial password in the "New Password" and "Confirm Password" fields. If shared
folders are defined on the system, select the default permissions granted to the new
user for each share.
Add A Shared Folder
Creates a new folder and shares it on the network. This function has several steps.
The first page introduces the wizard. Click "Begin Wizard" to proceed.
www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/