Sears Kenmore Refrigerator Instruction Manual page 9

REVERSING DOOR SWING (continued)
_t_tasher_
Center b,inge I!--
14,.
Remove screws (or plugs) in the hinge holes
in the top of the cabinet and reinstall in the
opposite set of holes,
15,
Place washer on center hinge pin_ Position
upper door on center hinge,
I6.
Assemble upper hinge to top of cabinet and
door° (Use opposite set of holes.) Do not
tighten screws,,
Align upper door with lower door so there
is a parallel gap. Adjust door to cabinet so
gasket seals but does not bind. Tighten upper
and lower hinge screws,
Door Seal: Check door seal by closing the
door on a 2,5 cm (1 inn) wide strip of paper. A
slight drag should be noticed when the paper
is pulled out from between the gasket and the
cabinet° Repeat around all four sides of door.
tf door does not seal, readjust upper or lower
hinge as necessary.
If door still does not seat, call your Dealer or Service
Agency° Service on the door seal after reversing doors
is not included in the warranty.
Additional adjustment may be necessary after loading
the door shelves.
17.
Return food, juices and other articles to
doors_ Turn on refrigeratorlfreezer controls,,