Materials Needed; Basic Tools - Sears 153.313230 Owner's Manual

Materials Needed
To simplify the installation Sears has available the installa_
tion parts shown below. You may or may not need all of
these materials, depending on your type of installation.
WATER HEATER INSTALLATION
KIT WITH FLEXIBLE CONNEC-
TORS FOR 3/4" GALVANIZED
OR 1/2 '1PLUMBING
m
cz_
Compression
Couplings
compression couplings for connecting to
copper plumbing without sweat so|-
dering
m
Water Heater
Heat Traps
EXPANSION TANKS FOR THERMAL EXPAN-
SION CONDITIONS AVAILABLE IN 2 GALLON
AND 5 GALLON CAPACITY THROUGH LOCAL
SEARS SERVICE CENTERS
WATER HEATER HEAT TRAPS
HELP REDUCE HEAT LOSS DUE
TO THERMAL SYPHONING
20" DIAMETER DRAIN PAN FOR
WATER HEATERS 18" IN
DIAMETER AND UNDER
28" DIAMETER DRAIN PAN FOR
WATER HEATERS 26" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on
your type of installation. These tools can be purchased at
your local Sears store.
Pipe Wrench (2)
Screwdriver
6 Foot Tape or Folding Rule
Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PHILLIPS SCREWDRIVER
PIPE
WRENCH
PIPE DOPE (SQUEEZE TUBE) _.//
roll of teflon tape DRILL
(Use only on water connections)
ADDITIONAL TOOLS NEEDED WHEN
SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
HACKSAW
3/4" WIRE BRUSH
1/2" WIRE BRUSH
ROLL OF LEAD
FREE SOFT SOLDER
ROLL OF EMERY
CLOTH
SOLDER FLUX
1
PROPANE TORCH
TUBING CUTTER