Installing T-Flash Card; Charging The Battery - Icemobile VIENTO II User Manual

replace the SIM card.
 Barring code
A barring code is required for setting the call barring
function. You can obtain this code from the network
operator to set the call barring function.

3.2 Installing T-Flash Card

The T-Flash card is a pluggable mobile storage card inside
the mobile phone.
To install the T-Flash card, open its latch, place its
indented side downward, insert the card into the card slot,
and then close the latch.
To remove the T-flash card, open its latch and slightly
press the card inward. The card will automatically pop out.
Close the latch.
Note:
1. The mobile phone cannot automatically identify the
T-flash card being inserted when the mobile phone is
powered on. You must power off the mobile phone and
then power it on, so that the phone can identify the
T-Flash card.
2. The T-Flash card is a miniature object. Keep it out of
the reach of children for fear that children swallow it!

3.3 Charging the Battery

The lithium battery delivered with the mobile phone can
be put into use immediately after being unpacked. A new
battery will have maximum performance after the first
three full charge/discharge cycles.
Battery level indication:
 Your mobile phone can monitor and display the battery
state.
 Normally the remaining energy of the battery is
- -
12