Installing T-Flash Card; Charging The Battery - Icemobile ROCK MINI User Manual

 PUK2
The PUK2 code (Personal Unlocking Key2, 8digits), supplied with SIM card by the vendor. If not,
contact the network operator. If you input wrong PUK2 for ten times, the PIN2 will be invalid and the
corresponding functions cannot be used. Please contact the network operator to replace the SIM card.
 Barring code
A barring code is required for setting the call barring function. You can obtain this code from the
network operator to set the call barring function.
3.2

Installing T-Flash Card

The T-Flash card is a pluggable mobile storage card inside the mobile phone.
To install the T-Flash card, open its latch, place its indented side downward, insert the card into the card
slot, and then close the latch.
To remove the T-flash card, open its latch and slightly press the card inward. The card will automatically
pop out. Close the latch.
Note:
1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is
powered on. You must power off the mobile phone and then power it on, so that the phone can identify the
T-Flash card.
2. The T-Flash card is a miniature object. Keep it out of the reach of children for fear that children swallow
it!
3.3

Charging the Battery

The lithium battery delivered with the mobile phone can be put into use immediately after being
-11-