Call Waiting; Call Divert - Icemobile VIENTO II User Manual

sent
 All session received: Viewing all of the rate of
sessions received
 Reset counter: Clearing all rates
Call Settings
5.20.1.1 SIM1 call settings
 Caller ID: You can select the ID set by the network,
hide the ID, or send the ID. By default, the ID set by the
network is chosen.
Note: This function relates to the network. If you select
Hide ID, dialing may fail. Therefore, make sure that calls
can be normally dialed before you choose Hide ID.

◆ Call waiting


Activate: After you choose Activate, the mobile
phone will contact the network. A moment later, the
network will make a response and send a message to
acknowledge your operation. If the call waiting function is
activated, the network will alert you and the mobile phone
screen will display the incoming call number if others are
calling you while you are already in a conversation.

Deactivate: If you choose Deactivate, the network
will not alert you when others are calling you while you
are already in a conversation.

Query status: Query the network to obtain the current
call waiting status.
 Call divert
this network function enables you to forward incoming
calls to another number you have previously specified. To
set this function, choose Call center > General call settings
> SIM1/SIM2 call settings > call divert, and then press the
OK key.
- -
47