Getting Started; Installing The Sim Cards And The Battery - Icemobile VIENTO II User Manual

3

Getting started

3.1 Installing the SIM Cards and the Battery

An SIM card carries useful information, including your
mobile phone number, PIN (Personal Identification
Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2
Unlocking Key), IMSI (International Mobile Subscriber
Identity), network information, contacts data, and short
messages data.
Note:
After powering off your mobile phone, wait for a few
seconds before removing or inserting an SIM card.
Exercise caution when operating an SIM card, as friction
or bending will damage the SIM card.
Properly keep the mobile phone and its fittings such as the
SIM cards beyond children's reach.
Installation
 Hold the End key for a while to power off the mobile
phone
 Push the back cover above the battery and remove it.
 Pull the left battery buckle outward and then lift the
battery away.
 Insert the SIM card into the SIM card slot lightly with
the corner cutting of the card aligning to the notch of the
slot and the gold plate of the card facing download, till the
SIM card cannot be further pushed in.
 Aim the positive pole and negative pole of the battery
at the battery connector of the mobile phone, and press the
left of the battery to install the battery into the battery
tank.
- -
9