Table of Contents
Advertisement
R
UNNING THE
If the Gateway needs to be configured, for example if it has not
yet been used or has been reset, it will run the Setup Wizard
automatically. This detects some of the settings the Gateway
needs to function and asks that you input the others.
Accessing the Wizard
The Cable/DSL Secure Gateway Setup Wizard is Web-based,
which means that it is accessed through your Web browser
(Netscape Navigator or Internet Explorer).
To use the Setup Wizard:
1
Ensure that you have at least one computer connected to the
Gateway. See
"Installing the Gateway"
Launch your Web browser on the computer. Enter the URL of
2
your Gateway in to the location or address box of your browser
(Figure
9).
The default URL for the gateway is http://192.168.1.1. If you
have changed the IP address of the unit you should substitute
this for the default address within the URL.
Figure 9 Web Browser Location Field (Factory Default)
S
W
ETUP
IZARD
on
page
15.
The Login screen, as shown in
browser. If it does not, refer to
To log in, enter the password (the default password is admin) in
3
the System Password field and click Log in.
Figure 10 Login Screen
4
If the password is correct, the OfficeConnect Cable/DSL Secure
Gateway Welcome screen, shown in
your Gateway has not been configured before, the Wizard,
shown in
Figure
12, will also launch automatically.
23
Figure
10, should appear in your
"Troubleshooting"
on
page
67.
Figure
11, will appear. If
Advertisement
Table of Contents
