Battery Installation
1. Pull the battery drawer out carefully.
2. Place the Lithium battery, see Fig. 1 for correct polarity.
3. Close the battery drawer.
! CAUTION:
•
Ensure correct polarity / minus pole on top.
•
Use only the Lithium Battery CR2430 3.0 V 19372.
•
Remove battery if the EL-Skyport Transmitter is not used for some time.
•
Never short-circuit battery poles.
•
Avoid direct sunlight or temperatures above 45°C. The battery may explode!
Hot-Shoe Connector with Screw-Lock
The new Hot-shoe connector with screw-lock and middle contact synchronisation is designed
to fit digital and analogue cameras with maximum sync output of 3 V (the middle contact is
the positive pole).
Operating Instructions
Fi g . 1
Battery drawer
Battery (19372)
Minus pole on top
Flexible swivel
Antenna 360 ̊
Hot-shoe with
screw lock and
SYNC socket
3