Oven; Removal; Figure 4-3. Removal Of Oven From Chassis - Emerson Heated Flame Ionization Detector Module Model NGA 2000 HFID Instruction Manual

Model NGA 2000 HFID

4-2 OVEN

Though the oven can be replaced as a com-
plete unit, all internal components are field re-
placeable.
a.

Removal

Refer to Figure 4-3, disconnect the oven's
three gas lines and seven electrical ca-
bles, noting location of mating connectors
for re-installation.
Rosemount Analytical Inc. A Division of Emerson Process Management
Oven Assembly
659551

Figure 4-3. Removal of Oven from Chassis

Instruction Manual
NOTE
DO NOT remove the fittings from the
gas lines on the detector.
Remove the two hex nuts securing the
oven to the chassis and the two
screws securing oven to the rear
panel. Lift oven assembly from ana-
lyzer.
Maintenance and Service
760004-A
February 2002
4-3