Replacing The Display Assembly - Dell Inspiron 1440 Service Manual

1 camera cable 2
3 display cable 4
14. Remove the two screws that secure the display assembly to the computer base.
1 display assembly
15. Lift and remove the display assembly from the computer base.

Replacing the Display Assembly

1. Place the display assembly in position and replace the two screws that secure the display assembly to the computer base.
2. Route the Mini-Card antenna cables, camera cable, and display cable through the routing guides.
3. Connect the camera cable to the system board connector.
4. Replace the palm rest (see
5. Replace the power button board (see
6. Replace the keyboard (see
7. Replace the center control cover (see
8. Replace the two screws at the bottom of the computer.
Mini-Card antenna cables
camera cable connector
2 screws (2)
Replacing the Palm Rest).
Removing the Power Button
Replacing the Keyboard).
Replacing the Center Control
Board).
Cover).