Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Edimax USB 2.0 to Fast Ethernet Adapter With 3-Port USB Hub EU-4230
Summary of Contents for Edimax USB 2.0 to Fast Ethernet Adapter With 3-Port USB Hub EU-4230
- Page 2 Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company.
-
Page 3: Table Of Contents
Table of Contents 1. Introduction ................1 Features ................1 Package Contents..............1 System Requirements............1 2. Installation ................2 Hardware Connection ............2 Driver Installation ..............3 On Windows 2000/XP/Server 2003/Vista ......3 On MAC OS X 10.3/10.4 ............. 6 Verifying the Driver Installation .......... -
Page 4: Introduction
1. Introduction It is a combination 10/100M Ethernet adapter and integrated standard-based 3-port USB hub all in one easy to use device. As a fully integrated USB solution, the new USB/Ethernet adapter allows users to easily connect to the Ethernet network with a complete out of the box, Plug-N-Play solution. -
Page 5: Installation
2. Installation Hardware Connection General instructions for installing the USB 2.0 3 Port Hub with Ethernet Adapter are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed. -
Page 6: Driver Installation
Driver Installation On Windows 2000/XP/Server 2003/Vista 1. With your computer switched on, insert the “USB2.0 to Fast Ethernet Adapter with 3-Port USB Hub” into an available USB2.0 port of your computer. The following message will appear on your screen, Please click ‘Cancel’ and use the wizard to install driver. - Page 7 2. Please insert the installation CD into your CDROM drive. The Autorun setup programs should run under Windows 2000/XP/Server 2003/Vista, or you can click on the “Browse CD” to find other OS drivers in the CD. 3. Connect the Ethernet adapter’s USB end to a free USB port of your computer.
- Page 8 *Actual strings depend on your operation system. These screen shots are from Windows Vista and might vary slightly for each operation system. Now the installation is complete. You can connect the adapter to a network device by an Ethernet cable: 1.
-
Page 9: On Mac Os X 10.3/10.4
On MAC OS X 10.3/10.4 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Drivers\Mac10.x.\ AX88772.pkg 2. When the Install AX88772 USB CDC Drivers screen appears, please select Continue. 3. When the screen below appears, please choose the volume that you want to install and click Continue. - Page 10 4. When the screen below appears, please click Upgrade to perform the software. 5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted.
- Page 11 7. Please click Restart to reboot the Mac. 8. Connect the Ethernet adapter to a free USB port. 9. Start System Preferences and select Network, you’ll see the screen as below prompted and please select OK. 10. You will find that a new Ethernet network interface is available. It’s usually named Ethernet Adapter (en1) or Ethernet Adapter (en2).11.
- Page 12 *Actual strings depend on your operation system. These screen shots are from MAC OS X 10.4 and might vary slightly for each operation system. Now the installation is complete. You can connect the adapter to a network device by an Ethernet cable: 1.
-
Page 13: Verifying The Driver Installation
Verifying the Driver Installation On windows 2000/XP/Server 2003/Vista Once you finish the installation, you can open Windows Device Manager to verify if your Ethernet adapter is properly installed. To access the Device Manager: On Windows Vista: Right-click Computer on the desktop and click Properties >... -
Page 14: On Mac Os X 10.3/10.4
On MAC OS X 10.3/10.4 Once you finish the installation, you can open GO > Utilities > System Profile > Hardward > USB > to verify if your Ethernet adapter is properly installed. In the USB High-Speed Bus group, an item named ASIXx72A should be displayed. -
Page 15: Specifications
3. Specifications Upstream port x 1 (USB Type A plug) Downstream port x 3 (USB Type A receptacles) Compliance : USB1.1 & USB 2.0 RJ-45 x 1 (Ethernet 10BASE-T/Fast Ethernet 100Base-TX port) Complies with the Full-duplex with flow control and Half-duplex with backpressure operation Power Supply Input : 100~240v 50Hz-60Hz... -
Page 16: Federal Communication Commission
4. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the USB 2.0 to Fast Ethernet Adapter With 3-Port USB Hub EU-4230 and is the answer not in the manual?
Questions and answers